本帖最后由 yxp 于 2023-8-11 11:13 编辑
以下为 AutoCAD 的版本号，对应程序开发必备，请大家一起来补充之。CAD 内部版本为 Rxx.x， 其中： xx 为主版本号， x 为副版本号； xx 升级后，对应的 SDK 库会更新，所以 arx 也得跟着更新。
AutoCAD R14-1998.1
AutoCAD 2000 (R15.0)
AutoCAD 2000i (R15.1) 感谢 aichong 的提醒
AutoCAD 2002 (R15.2)
AutoCAD 2004 (R16.0)
AutoCAD 2005 (R16.1)
AutoCAD 2006 (R16.2)
AutoCAD 2007 (R17.0)
AutoCAD 2008 (R17.1)
AutoCAD 2009 (R17.2)
AutoCAD 2010 (R18.0)
AutoCAD 2011 (R18.1)
AutoCAD 2012 (R18.2)
AutoCAD 2013 (R19.0)
AutoCAD 2014 (R19.1)
AutoCAD 2015 (R20.0)
AutoCAD 2016 (R20.1)
AutoCAD 2017 (R21.0)
AutoCAD 2018 (R22.0)
AutoCAD 2019 (R23.0)
AutoCAD 2020 (R23.1)
AutoCAD 2021 (R24.0)
AutoCAD 2022 (R24.1)
AutoCAD 2023 (R24.2)
AutoCAD 2024 (R24.3)
从 AutoCAD 2000 开始加入 Vlisp 函数，随后又补充了 R14 的 Vlisp 插件。
从 AutoCAD 2008 开始发行 64 位版本。
从 AutoCAD 2014 开始 Lisp 函数的 command 命令发生变化，需要用 vl-cmdf 或 command-s 替换。
网友答: 呵呵，10年前，在一家鬼子的厂里做设计时自己写了一些在模具上使用的LSP程序，在离职时，鬼子非要算是公司的。我就将关键函数的子程序编辑成了VLX文件，其他的都是。lsp的文件，他们看着很高兴，其实，用也可以用，那个VLX里面就加个了版本号，来判断。TNND小鬼子。网友答: History[edit]AutoCAD was derived from a program begun in 1977 and released in 1979[4] called Interact CAD,[5][6][7] also referred to in early Autodesk documents as MicroCAD, which was written prior to Autodesk's (then Marinchip Software Partners) formation by Autodesk cofounder Michael Riddle.[8][9]
The first version by Autodesk was demonstrated at the 1982 Comdex and released that December.[10] As Autodesk's flagship product, by March 1986 AutoCAD had become the most ubiquitous CAD program worldwide.[11] The 2019 release marked the 33rd major release of AutoCAD for Windows. The 2014 release marked the fourth consecutive year of AutoCAD for Mac.
Version history[edit]The native file format of AutoCAD is .dwg. This and, to a lesser extent, its interchange file format DXF, have become de facto, if proprietary, standards for CAD data interoperability, particularly for 2D drawing exchange.[citation needed] AutoCAD has included support for .dwf, a format developed and promoted by Autodesk, for publishing CAD data.
Autodesk's logo and, respectively, AutoCAD icons have changed for several versions through the years.
以下为 AutoCAD 的版本号，对应程序开发必备，请大家一起来补充之。CAD 内部版本为 Rxx.x， 其中： xx 为主版本号， x 为副版本号； xx 升级后，对应的 SDK 库会更新，所以 arx 也得跟着更新。
AutoCAD R14-1998.1
AutoCAD 2000 (R15.0)
AutoCAD 2000i (R15.1) 感谢 aichong 的提醒
AutoCAD 2002 (R15.2)
AutoCAD 2004 (R16.0)
AutoCAD 2005 (R16.1)
AutoCAD 2006 (R16.2)
AutoCAD 2007 (R17.0)
AutoCAD 2008 (R17.1)
AutoCAD 2009 (R17.2)
AutoCAD 2010 (R18.0)
AutoCAD 2011 (R18.1)
AutoCAD 2012 (R18.2)
AutoCAD 2013 (R19.0)
AutoCAD 2014 (R19.1)
AutoCAD 2015 (R20.0)
AutoCAD 2016 (R20.1)
AutoCAD 2017 (R21.0)
AutoCAD 2018 (R22.0)
AutoCAD 2019 (R23.0)
AutoCAD 2020 (R23.1)
AutoCAD 2021 (R24.0)
AutoCAD 2022 (R24.1)
AutoCAD 2023 (R24.2)
AutoCAD 2024 (R24.3)
从 AutoCAD 2000 开始加入 Vlisp 函数，随后又补充了 R14 的 Vlisp 插件。
从 AutoCAD 2008 开始发行 64 位版本。
从 AutoCAD 2014 开始 Lisp 函数的 command 命令发生变化，需要用 vl-cmdf 或 command-s 替换。
网友答: 呵呵，10年前，在一家鬼子的厂里做设计时自己写了一些在模具上使用的LSP程序，在离职时，鬼子非要算是公司的。我就将关键函数的子程序编辑成了VLX文件，其他的都是。lsp的文件，他们看着很高兴，其实，用也可以用，那个VLX里面就加个了版本号，来判断。TNND小鬼子。网友答: History[edit]AutoCAD was derived from a program begun in 1977 and released in 1979[4] called Interact CAD,[5][6][7] also referred to in early Autodesk documents as MicroCAD, which was written prior to Autodesk's (then Marinchip Software Partners) formation by Autodesk cofounder Michael Riddle.[8][9]
The first version by Autodesk was demonstrated at the 1982 Comdex and released that December.[10] As Autodesk's flagship product, by March 1986 AutoCAD had become the most ubiquitous CAD program worldwide.[11] The 2019 release marked the 33rd major release of AutoCAD for Windows. The 2014 release marked the fourth consecutive year of AutoCAD for Mac.
Version history[edit]The native file format of AutoCAD is .dwg. This and, to a lesser extent, its interchange file format DXF, have become de facto, if proprietary, standards for CAD data interoperability, particularly for 2D drawing exchange.[citation needed] AutoCAD has included support for .dwf, a format developed and promoted by Autodesk, for publishing CAD data.
Autodesk's logo and, respectively, AutoCAD icons have changed for several versions through the years.
| Official name | Version | DWG tag | Release | OS support | Date of release | Comments |
| AutoCAD Version 1.0 | 1.0 | 1 | 1982, December | DWG R1.0 file format | ||
| AutoCAD Version 1.2 | 1.2 | 2 | 1983, April | DWG R1.2 file format | ||
| AutoCAD Version 1.3 | 1.3 | 3 | 1983, August | DWG R1.3 file format | ||
| AutoCAD Version 1.4 | 1.4 | 4 | 1983, October | DWG R1.4 file format | ||
| AutoCAD Version 2.0 | 2.0 | 5 | 1984, October | DWG R2.05 file format | ||
| AutoCAD Version 2.1 | 2.1 | 6 | 1985, May | DWG R2.1 file format | ||
| AutoCAD Version 2.5 | 2.5 | 7 | 1986, June | DWG R2.5 file format | ||
| AutoCAD Version 2.6 | 2.6 | 8 | 1987, April | DWG R2.6 file format. Last version to run without a math co-processor. | ||
| AutoCAD Release 9 | 9.0 | 9 | 1987, September | DWG R9 file format | ||
| AutoCAD Release 10 | 10.0 | 10 | 1988, October | DWG R10 file format | ||
| AutoCAD Release 11 | 11.0 | 11 | 1990, October | DWG R11 file format | ||
| AutoCAD Release 12 | 12.0 | 12 | 1992, June | DWG R11/R12 file format. Last release for Apple Macintosh till 2010. | ||
| AutoCAD Release 13 | 13.0 | 13 | 1994, November | DWG R13 file format. Last release for Unix, MS-DOS and Windows 3.11. | ||
| AutoCAD Release 14 | 14.0 | 14 | 1997, February | DWG R14 file format | ||
| AutoCAD 2000 | 15.0 | AC1015 | 15 | 1999, March | DWG 2000 file format | |
| AutoCAD 2000i | 15.1 | AC1015 | 16 | 2000, July | ||
| AutoCAD 2002 | 15.2 | AC1015 | 17 | 2001, June | ||
| AutoCAD 2004 | 16.0 | AC1018 | 18 | 2003, March | DWG 2004 file format | |
| AutoCAD 2005 | 16.1 | AC1018 | 19 | 2004, March | ||
| AutoCAD 2006 | 16.2 | AC1018 | 20 | 2005, March | Dynamic Block | |
| AutoCAD 2007 | 17.0 | AC1021 | 21 | 2006, March | DWG 2007 file format | |
| AutoCAD 2008 | 17.1 | AC1021 | 22 | 2007, March | Annotative objects introduced. AutoCAD 2008 and higher (including AutoCAD LT) can directly import and underlay DGN V8 files. | |
| AutoCAD 2009 | 17.2 | AC1021 | 23 | 2008, March | Revisions to the user interface including the option of a tabbed ribbon | |
| AutoCAD 2010 | 18.0 | AC1024 | 24 | Windows XP Windows Vista Windows 7[12][13][14] | 2009, March 24 | DWG 2010 file format introduced. Parametrics introduced. Mesh 3D solid modeling introduced. PDF underlays. Both 32-bit and 64-bit versions of AutoCAD 2010 and AutoCAD LT 2010 are compatible with and supported under Microsoft Windows 7. |
| AutoCAD 2011 | 18.1 | AC1024 | 25 | 2010, March 25 | Surface modeling, surface analysis and object transparency introduced. October 15, 2010[15] AutoCAD 2011 for Mac was released. Are compatible with and supported under Microsoft Windows 7 | |
| AutoCAD 2012 | 18.2 | AC1024 | 26 | 2011, March 22 | Associative array, model documentation, DGN editing. Support for complex line types in DGN files is improved in AutoCAD 2012. | |
| AutoCAD 2013 | 19.0 | AC1027 | 27 | Windows XP Vista Windows 7 Windows 8[16][17] | 2012, March 27 | DWG 2013 file format (AC1027) |
| AutoCAD 2014 | 19.1 | AC1027 | 28 | 2013, March 26 | File tabs, design feed, reality capture, Autodesk live maps | |
| AutoCAD 2015 | 20.0 | AC1027 | 29 | Windows 7 Windows 8 Windows 8.1[18] | 2014, March 27 | Line smoothing (anti-aliasing), Windows 8.1 support added, dropped Windows XP support (incl. compatibility mode) |
| AutoCAD 2016 | 20.1 | AC1027 | 30 | Windows 7 SP1 Windows 8.1 Windows 10[19][20] | 2015, March 23 | More comprehensive canvas, richer design context, and intelligent new tools such as smart dimensioning, coordination model, and enhanced PDFs |
| AutoCAD 2017 | 21.0 | AC1027 | 31 | 2016, March 21 | PDF import, associative center marks, and centerlines, DirectX 11 graphics | |
| AutoCAD 2018 | 22.0 | AC1032 | 32 | 2017, March 21 | DWG 2018 file format | |
| AutoCAD 2019 | 23.0 | AC1032 | 33 | Windows 8.1 Windows 10 | 2018, March 22 | Shared Views, DWG Compare, Save To AutoCAD Web & Mobile网友答:
本帖最后由 aichong 于 2021-7-2 23:11 编辑 2022简体中文版 内部版本：R24.1 dwg文件格式：2018 文件头标签dwg tag：AC1032 注册表位置：ACAD-5101:804 网友答: 沙发占地关注中网友答: 从 AutoCAD 2014 开始 Lisp 函数的 command 命令发生变化，需要用 vl-cmdf 或 command-s 替换。 测试了一下 2012 好像 就有command-s 了网友答: 谁有 AutoCAD 2008 64 位版本 发个链接我 一直没找到网友答: 感谢楼主，很全。网友答: 收藏先 先保存下来网友答: r14用过，dos版本的没用过  网友答:
感谢楼主，很全。网友答:
@vectra，CAD2008 64位不要找了，找不到的
|